I'm working on displaying the PV after each iterative ply.
to do so, I walk the moves from the PV onto a a temporary board with the following stopping actions:
a TT entry was not found for the position
a TT entry was found but it wasn't an EXACT type
the move from the PV wasn't valid for the given position (more of a dumb programmer check)
this seems to work ok until i tried it on the Fine 70 position.
8/k7/3p4/p2P1p2/P2P1P2/8/8/K7 w - - 0 1
when the iterative loops it gets down to ply 25 or so, the moves returned from the TT after 8 or 9 moves in put it into an endless loop, meaning the move from position (b) points back to position (a) which points to position (b), which eventually overwrote some buffers. my first instinct was that i had a problem with my repetition code, which there was, but once repaired, the problem still persists.
any ideas what is causing this?
i can temporarily keep it from running away by limiting the amount of PV moves I display to a fixed number, but me thinks there is something else wrong, perhaps with the way i'm storing results in the TT.